Amakhemikhali kanye Mechanical
I-34CrNiMo6 Ukwakheka kwamakhemikhali kanye nezakhiwo ze-Equivalents zezinga lensimbi
| I-BS EN 10083 – 3:2006 |
34CrNiMo6 |
C |
Si |
Si |
P |
S |
Cr |
Mo |
Ni |
| 0.30-0.38 |
0.40 Max |
0.50-0.80 |
0.025 ubuningi |
0.035 ubuningi |
1.30-1.70 |
0.15-0.30 |
1.30-1.70 |
34CrNiMo6 Steel Mechanical Properties
| Ububanzi(mm) |
< 16 |
16~ 40 |
40~100 |
100~160 |
160 ~250 |
| Ubukhulu t (mm) |
<8 |
8~20 |
20~60 |
60~100 |
100~160 |
| Amandla e-Tensile Rm (N/mm2) |
1200 - 1400 |
1100 - 1300 |
1000 - 1200 |
900 - 1100 |
800 - 950 |
| I-Elongation A (%) |
9 imiz |
10 min |
11 Min |
Imizuzu engu-12 |
13 imiz |
| Ukwehliswa kwendawo Z (%) |
40Miz |
45 min |
50Miz |
55Miz |
55min |
| I-Toughness CVN (J) |
35Miz |
45Miz |
45Miz |
45Miz |
45 min |
| Amandla okukhiqiza kabusha (N/mm²) |
1000 Min |
900 Min |
800 Min |
700 Min |
600 Min |
I-EN 34CrNiMo6 Amazinga Ensimbi Nezilinganiso
| I-BS EN 10083 -3: 2006 |
34CrNiMo6 / 1.6582 |
I-ASTM A29: 2004 |
4337 |
| I-BS EN 10250 – 3: 2000 |
3. EN/DIN 34CrNiMo6 Steel Chemical Composition Properties
| I-BS EN 10083 – 3:2006 |
34CrNiMo6
/1.6582 |
C |
UMn |
Si |
P |
S |
Cr |
Mo |
Ni |
| 0.30-0.38 |
0.5-0.8 |
0.40 ubuningi |
0.025 ubuningi |
0.035 ubuningi |
1.3-1.7 |
0.15-0.30 |
1.3-1.7 |
| I-BS EN 10250-3:2000 |
C |
UMn |
Si |
P |
S |
Cr |
Mo |
Ni |
| 0.30-0.38 |
0.5-0.8 |
0.40 ubuningi |
0.035 ubuningi |
0.035 ubuningi |
1.3-1.7 |
0.15-0.30 |
1.3-1.7 |
| I-ASTM A29: 2004 |
4337 |
C |
UMn |
Si |
P |
S |
Cr |
Mo |
Ni |
| 0.30-0.40 |
0.6-0.8 |
0.20-0.35 |
0.035 ubuningi |
0.040 ubuningi |
0.70-0.90 |
0.20-0.30 |
1.65-2.00 |
4.Izakhiwo Zomshini ze-EN/DIN 34CrNiM06 / 1.6582 Alloy Steel
| Izakhiwo |
< 16 |
> 16 – 40 |
> 40 – 100 |
> 100 - 160 |
> 160 – 250 |
| Ubukhulu t [mm] |
<8 |
8
| 20
| 60
| 100
|
| Amandla okukhiqiza kabusha [N/mm²] |
imiz. 1000 |
imiz. 900 |
imiz. 800 |
imiz. 700 |
imiz. 600 |
| Amandla okuqina Rm [N/mm2] |
1200 - 1400 |
1100 - 1300 |
1000 - 1200 |
900 - 1100 |
800 - 950 |
| I-Elongation A [%] |
imiz. 9 |
imiz. 10 |
imiz. 11 |
imiz. 12 |
imiz. 13 |
| Ukwehliswa kwendawo Z [%] |
imiz. 40 |
imiz. 45 |
imiz. 50 |
imiz. 55 |
imiz. 55 |
| I-Toughness CVN [J] |
imiz. 35 |
imiz. 45 |
imiz. 45 |
imiz. 45 |
imiz. 45 |
Ukwelashwa kwe-5.Heat ye-34CrNiMo6 Engineering Steel
Icinyiwe futhi I-Tempered (Q+T) ye-34CrNiMo6 Steel
- Shisisa insimbi eyindilinga engu-34CrNiMo6 kancane kancane ukuya ekushiseni kuka-850°C;
- Gcoba kulokhu kucisha ukushisa okuqinile emafutheni;
- Ukushisa ngokushesha lapho izinsimbi ze-34CrNiMo6 zifinyelela izinga lokushisa legumbi.
- Shisisa ngendlela efanayo ezingeni lokushisa elifanele;
- Khipha esithandweni bese upholisa emoyeni.
- Izinga lokushisa elijwayelekile lingama-600°C okuya ngezidingo zangempela.
6.Ukwenziwa kwe-DIN 34CrNiMo6 / 1.6582 Steel
Izinga lokushisa elishisayo lokubumba: 1100-900oC.
7.Ukusebenziseka Kwensimbi 34CrNiMo6
Ukucutshungulwa kwenziwa kangcono ngale nsimbi ye-alloy engu-1.6582 esimweni esihlanganisiwe noma esijwayelekile nesithambile. Ingenziwa ngomshini ngazo zonke izindlela ezijwayelekile.
8.Ukushisela
Izinto ze-alloy zingaba yi-fusion noma ukumelana ne-welded. Izinqubo ze-Preheat kanye ne-post heat weld weld kufanele zilandelwe lapho kushiswa le alloy ngezindlela ezimisiwe.
9.Uhlelo lokusebenza
I-EN DIN 34CrNiMo6 insimbi isetshenziselwa ukwenza amathuluzi adinga ipulasitiki enhle namandla aphezulu. Ivamise ukukhethwa ukwenza usayizi omkhulu nezingxenye ezibalulekile, njenge-axle yemishini esindayo, i-turbine shaft blade, umthwalo omkhulu wezingxenye zokudlulisela, izinsimbi, ama-crank shafts, amagiya, kanye nezingxenye ezilayishwe kakhulu zokwakha imoto njll.
I-Gnee Steel ithembekile ekuhlinzekeni ubunjiniyela be-34CrNiMo6 / 1.6582 engineering alloy steels. Sicela usitshele izidingo zakho ezinemininingwane futhi uthole okunikezwayo okungcono kakhulu maduze.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
