Idatha yobuchwepheshe
Insimbi egoqwe ebandayo ngokuya nge-DIN EN 10130, 10209 kanye ne-DIN 1623
| Ikhwalithi |
Isiqondiso sokuhlola |
Okubalulekile-No. |
Iphoyinti lesivuno Rp0,2 (MPa) |
Amandla e-Tensile Rm (MPA) |
I-Elongation A80 (ku-%) iminithi. |
I-r-Value 90° min. |
n-Inani 90° min. |
Incazelo endala |
| DC01 |
Q |
1.0330 |
≤280 |
270 - 410 |
28 |
|
|
St 12-03 |
| DC03 |
Q |
1.0347 |
≤240 |
270 - 370 |
34 |
1,30 |
|
St 13-03 |
| DC04 |
Q |
1.0338 |
≤210 |
270 - 350 |
38 |
1,60 |
0,18 |
St 14-03 |
| DC05 |
Q |
1.0312 |
≤180 |
270 - 330 |
40 |
1,90 |
0,20 |
St 15-03 |
| DC06 |
Q |
1.0873 |
≤170 |
270 - 330 |
41 |
2,10 |
0,22 |
|
| DC07 |
Q |
1.0898 |
≤150 |
250 - 310 |
44 |
2,50 |
0,23 |
|
| Ikhwalithi |
Isiqondiso sokuhlola |
Okubalulekile-No. |
Iphoyinti lesivuno Rp0,2 (MPa) |
Amandla e-Tensile Rm (MPA) |
I-Elongation A80 (ku-%) iminithi. |
I-r-Value 90° min. |
n-Inani 90° min. |
| I-DC01EK |
Q |
1.0390 |
≤270 |
270 - 390 |
30 |
|
|
| I-DC04EK |
Q |
1.0392 |
≤220 |
270 - 350 |
36 |
|
|
| I-DC05EK |
Q |
1.0386 |
≤220 |
270 - 350 |
36 |
1,50 |
|
| I-DC06EK |
Q |
1.0869 |
≤190 |
270 - 350 |
38 |
1,60 |
|
| I-DC03ED |
Q |
1.0399 |
≤240 |
270 - 370 |
34 |
|
|
| I-DC04ED |
Q |
1.0394 |
≤210 |
270 - 350 |
38 |
|
|
| DC06ED |
Q |
1.0872 |
≤190 |
270 - 350 |
38 |
1,60 |
|
| Ikhwalithi |
Isiqondiso sokuhlola |
Okubalulekile-No. |
Iphoyinti lesivuno Rp0,2 (MPa) |
Amandla e-TensileRm (MPA) |
I-Elongation A80 (ku-%) iminithi. |
I-DIN 1623 T2 (endala) |
| I-S215G |
Q |
1.0116G |
≥215 |
360 - 510 |
20 |
St 37-3G |
| I-S245G |
Q |
1.0144G |
≥245 |
430 - 580 |
18 |
St 44-3G |
| I-S325G |
Q |
1.0570G |
≥325 |
510 - 680 |
16 |
St 52-3G |
Insimbi egoqiwe ebandayo nayo iyingxenye yephothifoliyo yomkhiqizo wethu. Insimbi egoqiwe ebandayo inhle kakhulu ekwakhekeni okubandayo. Leli qembu lomkhiqizo labela amabanga DC01 ku-DC07, DC01EK ku-DC06EK, DC03ED ku-DC06ED kanye ne-S215G ku-S325G.
Amabanga ahlukaniswa ngokwesilinganiso esiphezulu samandla esivuno avumelekile futhi angahlukaniswa ngale ndlela elandelayo.
DC01 – Leli banga lingasetshenziselwa umsebenzi olula wokwakha, isibonelo, ukugoba, ukugqamisa, ukwenza ubuhlalu nokudonsa kuyasetshenziswa.
DC03 – Leli banga lifanele ukwenza izimfuneko ezifana nokudweba Okujulile kanye namaphrofayela anzima afanelekile.
I-DC04 – Le khwalithi ifanele izimfuneko zokuwohloka okuphezulu.
I-DC05 – Leli banga le-thermoforming lifanele izimfuneko eziphezulu zokwenza.
DC06 – Le khwalithi yomdwebo ojulile okhethekile ifanele izimfuneko eziphakeme kakhulu zokuguqulwa.
DC07 – Le khwalithi yomdwebo ejule kakhulu ifanele izimfuneko zokuwohloka ngokwedlulele.
Amabanga anamethiwe
Amabanga ensimbi i-DC01EK, DC04EK ne-DC06EK afanele ungqimba olulodwa oluvamile noma ungqimba olukabili.
Amamaki ensimbi i-DC06ED, DE04ED kanye ne-DC06ED afaneleka ukuqinisa i-enamelling eqondile kanye nokwenziwa koqweqwe lwawo ngokwendlela yokudubula enezingqimba ezimbili / eyodwa kanye nokusetshenziswa okukhethekile kwe-enamelling enezingqimba ezimbili zokuhlanekezela okuphansi.
Uhlobo lobuso
Ubuso A
Amaphutha anjengama-pores, ama-grooves amancane, ama-warts amancane, ukuklwebheka okuncane kanye nokushintsha kombala okuncane okungaphazamisi ikhono lokubunjwa kabusha nokunamathela ezimbotsheni ezingaphezulu kuvunyelwe.
Ubuso B
Uhlangothi olungcono kufanele lungabi nasici ukuze ukubukeka okulinganayo kokuqedwa kwekhwalithi noma i-electrolytically coating ingasebenzi. Olunye uhlangothi kufanele okungenani luhlangabezane nezidingo zohlobo olungaphezulu A.
Ukuqedwa kobuso
Indawo engaphezulu ingase ibe bushelelezi, ibe buthuntu noma ibe mahhadlahhadla. Uma ingekho imininingwane enikeziwe lapho ku-oda, indawo engaphezulu izolethwa ngokuqedwa kwe-matt. Izindawo ezine eziqediwe ezisohlwini zihambisana namanani aphakathi nendawo kuthebula elilandelayo futhi kufanele ahlolwe ngokuvumelana ne-EN 10049.
| Ukuqedwa kobuso |
isici |
Ukuqedwa kwendawo okumaphakathi
(inani lomngcele: 0,8mm) |
| Ifulethi elikhethekile |
b |
I-Ra ≤ 0,4 µm |
| isicaba |
g |
I-Ra ≤ 0,9 µm |
| Math |
m |
0,60 µm ˂ Ra ≤ 1,9 µm |
| rough |
r |
I-Ra ≤ 1,6 µm |
.jpg)
