Intshayelelo yemveliso
I-ASTM A53 iGalvanized Steel Pipe ASTM A53 iGavanized Steel Pipe Greenhouse Steel Galvanized Pipe
Umgangatho we-ASTM A53 ubhekisa kumbhobho wentsimbi odityanisiweyo omnyama kunye noshushu oditshiweyo wentsimbi.
INGCACISO
| Imigangatho |
ASTM, ASME kunye API |
| Ubungakanani |
1/2” QAPHELA ukuya kuma-36” QAPHELA |
| Ukutyeba |
3-12mm |
| Iishedyuli |
SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, zonke iiShedyuli |
| Ukunyamezelana |
Umbhobho ozotyiweyo obandayo: +/-0.1mmUmbhobho oqengqelekayo obandayo: +/-0.05mm |
| Ubugcisa |
Ingqele iqengqelekisiwe kwaye iyabanda |
| Uhlobo |
Ingenamthungo / ERW / iWelded / Yenziwe |
| Ifom |
Round, Hydraulic Etc |
| Ubude |
Min 3 yeemitha, Max18 yeemitha, okanye ngokwemfuno umthengi |
| Isiphelo |
Isiphelo esicacileyo, isiphelo esiBeveled, sinyathelwe |
| Ikhethekileyo kwi |
I-Diameter enkulu ye-ASTM A53 yeBanga B uMbhobho |
| Uvavanyo olongezelelweyo |
NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, njl. |
IINTLOBO ZOMbhobho we-ASTM A53
I-ASTM A 53 igquma umbhobho wentsimbi ongenamthungo kunye newelding nobungqingqwa bodonga. Ubume bomphezulu buhlala bumnyama kwaye bufakwe emanzini ashushu. I-ASTM A53 iveliswa ikakhulu kuxinzelelo kunye nokusetyenziswa komatshini, kwaye ikwasetyenziselwa ukuthutha umphunga, amanzi, imibhobho yegesi.
IIMPAWU
Idizayinelwe ukugoba, ukugoba, i-A53 carbon steel pipe ilungele ukuwelda. Amabanga abonisa iimpawu ezithile zeekhemikhali kunye nezoomatshini kwaye kufuneka ziphawulwe xa zikhethwa.
UBUKHULU
½" – 12" ezinye izithintelo ezixhomekeke kwibakala. Ubukhulu ukuya kuthi ga kwi-26" OD bufumaneka ngesiseko esiqingqiweyo.
Inkcazo esemgangathweni yoMbhobho, iNsimbi, iMnyama kunye neHot-Dipped, i-Zinc-Coated, i-Welded kunye ne-Seamless. Olu luhlu lugubungela umbhobho wentsimbi ongenamthungo kunye odityanisiweyo omnyama kunye noshushu oditshiweyo wentsimbi.
Isicelo:
Ukusetyenziswa koomatshini kunye noxinzelelo, kunye nokuthutha umphunga, amanzi, igesi kunye njl.
Izatifikethi zovavanyo lweMill ziya kukhutshwa ngokwe-EN10204/3.1B.
Ityhubhu iya kungena kwinkqubo engenamthungo okanye yewelding. Uxinzelelo, ukugoba, kunye novavanyo lokuthambisa kuya kwenziwa ukuze kuqinisekiswe ukuba kufuneka kuhambelane neempawu zomatshini zomgangatho.
