I-PPGI kunye ne-PPGL yoKutyabeka ngePhepha

Khusela kumhlwa kwaye ukhethe umbala wakho ngentsimbi epeyintwe ngaphambili kunye neemveliso zentsimbi ezipeyintiweyo eziphuma kwi-Gnee Steel.
Intsimbi yangaphambili yepeyinti yintsimbi engenanto okanye i-corrosion resistant substrate eye yafakwa ipeyinti emacaleni omabini ngokusebenzisa inkqubo eqhubekayo yokugqoka i-coil, evelisa ukugqitywa kwepeyinti efanayo. Intsimbi ayinakulimala, icocwe kwaye iphathwe ngamachiza ngexesha lenkqubo. Ngokuxhomekeke kwiinkcukacha zemveliso, elinye okanye omabini amacala anokuthi emva koko aqhotswe kwaye agqunywe, i-oveni inyangwe kwaye iphindwe.

Ukuhlelwa	Into
Isicelo	Ukusetyenziswa kwangaphakathi (Ngaphandle) kwisakhiwo; Ishishini lezothutho; Izixhobo zombane zasekhaya
Umphezulu wokugquma	Uhlobo olupeyintwe kwangaphambili; Uhlobo olubhalwe; Uhlobo olushicilelweyo
Uhlobo lwengubo egqityiweyo	Ipolyester(PE); I-silicone i-polyester elungisiweyo (SMP); i-lyvinylidence fluoride(PVDF); Ipolyester yokuqina okuphezulu (HDP)
Uhlobo lwesiseko sesinyithi	Ishiti lentsimbi elipholileyo; Idiphu eshushu ishidi lentsimbi; Icwecwe lentsimbi yediphu eshushu galvalume
Ubume bokwaleka	Iingubo ezi-2 /2 eziguquguqukayo kwicala eliphezulu kunye nasemva; I-2 /1 i-coating kabini phezulu kunye ne-coating enye ngasemva
Ubunzima bokugquma	Kuba 2/1: 20-25micron/5-7micron Kuba 2/2: 20-25micron/10-15micron
Umlinganiselo	Ubukhulu: 0.14-3.5mm; Ububanzi: 600-1250mm

FAQ malunga nePPGI / PPGL

Umbuzo: Yintoni inzuzo ye-GL xa ithelekiswa nezinye iintsimbi?
A: I-allo kunye ne-zinc ingxubevange yokwaleka yenza ukuba intsimbi isebenze ngcono kakhulu ekulweni nomhlwa kunye nexabiso leendleko zezoqoqosho.

Q: Loluphi usebenziso oluninzi lwentsimbi?
A: Ukutyeba 0.13mm-0.50mm intsimbi ithandwa ukufulela, 0.60-3.0mm intsimbi ethandwa deforming kunye decking.

Umbuzo: Yintoni iphakheji yokuthumela?
A: Iphakheji yolwandle kunye ne-in-container yokuqinisa, iliso eludongeni / iliso esibhakabhakeni kunye nephalethi yokhuni ekhoyo ukuze ikhethwe.

Umbuzo: Ngaba uyalwamkela uhlolo lweqela lesithathu?
A: Ewe siyavuma ngokupheleleyo.

Umbuzo: Ziziphi iimveliso zakho eziphambili?
A: Intsimbi yeCarbon, insimbi ye-alloy, ipleyiti yensimbi engenasici / ikhoyili, umbhobho kunye nokufakelwa, amacandelo njl.

Q: Ungaziqinisekisa njani iimveliso zakho?
A: Isiqwenga ngasinye seemveliso senziwa ziindibano zocweyo eziqinisekisiweyo, zihlolwe isiqwenga ngesiqwenga ngokwe
umgangatho we-QC wesizwe. Kwakhona sinokukhupha iwaranti kumthengi ukuqinisekisa umgangatho.

Umbuzo: Ngaba unayo inkqubo yokulawula umgangatho?
A: Ewe, sinazo ISO, BV, SGS izatifikethi.