DC51D Galvanized pre Painted steel coil

Ukwaleka kweZinc:     NgokweMigangatho ye-MIC G90 ( Z275 ).
Peyinta ukutyabeka:   Icala eliphezulu 18 ukuya 20 Micron ezahlukeneyo RAL #.
I-Primer coating: 5-7 microns. Icala elingasemva 5-12 microns.
Ukugqitywa komphezulu:  Iglosi, iSemi-gloss kunye ne-matte.
Ifilimu yokugada: Ifilimu yeplastiki ekhuselayo inokusetyenziswa ngokwemfuneko.
Ubunzima bekhoyili:       Ukusuka ku-2 MT ukuya ku-7 MT.
Ukutyeba:    Ubunzima obahlukeneyo
Ububanzi bekhoyili:  Ngokwe-MIC Specification / Ukusuka kwi-600mm ukuya kwi-1500 mm.
Ikhoyili ID: 508 mm

Igama lemveliso	Ikhoyili yentsimbi eyenziwe ngePheyintiya
IBanga	I-JIS G3312-CGCC, CGC340-570, (G550) I-ASTM A755M CS-B, SS255-SS550
Ukutyeba	0.12mm-2.0mm
Ububanzi	600mm-1500mm
I-Zinc Coating	Z30gr/m2-Z400gr/m2(zombini icala lilonke ubukhulu bokutyabeka)
Izinto zokupeyinta	PE, RMP, SMP, HDP, PVDF Paint
Umbala	ISistim yoMbala weRal okanye ngokwesampulu yombala yomthengi ngamnye
Ukupeyinta Ukutyeba	Icala eliphezulu: 10-20microns
	I-Primer: 5-7microns
	Icala elingasemva: 5-7microns
Ubunzima bekhoyili	Iitoni ezi-3-8
Ikhoyili ID	508mm/610mm
Unyango lweMichiza	Chromated(Cr 3+, 6+, 0+)
Umphezulu	Skin-pass
I-oyile	Yomile
Ukupakisha	Thumela ukuPakisha okusemgangathweni

Umgangatho:

	PPGI
	I-GB/T12754-06	JIS G 3312	EN 10169
CQ	TDC51D+Z	CGCC	DX51D+Z
DQ	TDC52D+Z	CGCD	DX52D+Z
	TS250GD+Z TS280GD+Z TS320GD+Z TS350GD+Z		S250GD+Z S260GD+Z S320GD+Z S350GD+Z

Usetyenziso: Ngaphandle: uphahla, ulwakhiwo lophahla, iphepha lomphezulu webalcony, isakhelo sefestile, ucango, iingcango zegaraji, ucango lwe-roller shutter, i-booth, iimfama zasePersi, i-cabana, inqwelo efrijiweyo njalo njalo. Ngaphakathi: umnyango, i-isolators, isakhelo socango, isakhiwo sentsimbi esikhanyayo sendlu, umnyango otyibilikayo, isikrini esisongayo, isilingi, umhombiso wangaphakathi wendlu yangasese kunye ne-elevator.


FAQ

I-1.Q: Ngaba uyifektri okanye inkampani yokurhweba?
A: Singabavelisi abaqeqeshiweyo, kwaye inkampani yethu nayo iyingcali kakhulu yenkampani yorhwebo yeemveliso zentsimbi.Sinokubonelela ngeemveliso ezininzi zentsimbi.

I-2.Q: Yintoni eyenziwa yifektri yakho malunga nokulawula umgangatho?
A: Sifumene i-ISO, i-CE kunye nezinye iziqinisekiso. Ukusuka kwizixhobo ukuya kwiimveliso, sijonga yonke inkqubo yokugcina umgangatho olungileyo.

3.Q: Ngaba ndingazifumana iisampuli ngaphambi komyalelo?
A: Ewe, kunjalo. Ngokuqhelekileyo iisampuli zethu zikhululekile. sinokuvelisa ngeesampuli zakho okanye imizobo yobugcisa.

I-4.Q:Uyenza njani ishishini lethu ixesha elide kunye nobudlelwane obuhle?
A: Sigcina umgangatho olungileyo kunye nexabiso elikhuphisanayo ukuqinisekisa ukuba abathengi bethu bayazuza; Sihlonipha wonke umthengi njengomhlobo wethu kwaye siqhuba ishishini ngokunyanisekileyo kwaye senze ubuhlobo nabo. Nokuba bavela phi na.

5.Q: lithini ixesha lakho lokuhambisa?
A: Ixesha lethu lokuhambisa limalunga neveki enye, ixesha ngokwenani labathengi.