Intsimbi epholileyo eqengqelekayo ngokwe-DIN EN 10130, 10209 kunye neDIN 1623
| Umgangatho |
Isikhokelo sovavanyo |
Izinto eziphathekayo-Nomb. |
Indawo yesivuno Rp0,2 (MPa) |
Amandla okuqina Rm (MPA) |
Elongation A80 (kwi%) min. |
r-Ixabiso 90 ° min. |
n-Ixabiso 90° min. |
Inkcazo endala |
| DC01 |
Q |
1.0330 |
≤280 |
270 - 410 |
28 |
|
|
St 12-03 |
| DC03 |
Q |
1.0347 |
≤240 |
270 - 370 |
34 |
1,30 |
|
St 13-03 |
| DC04 |
Q |
1.0338 |
≤210 |
270 - 350 |
38 |
1,60 |
0,18 |
St 14-03 |
| DC05 |
Q |
1.0312 |
≤180 |
270 - 330 |
40 |
1,90 |
0,20 |
St 15-03 |
| DC06 |
Q |
1.0873 |
≤170 |
270 - 330 |
41 |
2,10 |
0,22 |
|
| DC07 |
Q |
1.0898 |
≤150 |
250 - 310 |
44 |
2,50 |
0,23 |
|
| Umgangatho |
Isikhokelo sovavanyo |
Izinto eziphathekayo-Nomb. |
Indawo yesivuno Rp0,2 (MPa) |
Amandla okuqina Rm (MPA) |
Elongation A80 (kwi%) min. |
r-Ixabiso 90 ° min. |
n-Ixabiso 90° min. |
| DC01EK |
Q |
1.0390 |
≤270 |
270 - 390 |
30 |
|
|
| DC04EK |
Q |
1.0392 |
≤220 |
270 - 350 |
36 |
|
|
| DC05EK |
Q |
1.0386 |
≤220 |
270 - 350 |
36 |
1,50 |
|
| DC06EK |
Q |
1.0869 |
≤190 |
270 - 350 |
38 |
1,60 |
|
| DC03ED |
Q |
1.0399 |
≤240 |
270 - 370 |
34 |
|
|
| DC04ED |
Q |
1.0394 |
≤210 |
270 - 350 |
38 |
|
|
| DC06ED |
Q |
1.0872 |
≤190 |
270 - 350 |
38 |
1,60 |
|
| Umgangatho |
Isikhokelo sovavanyo |
Izinto eziphathekayo-Nomb. |
Indawo yesivuno Rp0,2 (MPa) |
Amandla okuqinaRm (MPA) |
Elongation A80 (kwi%) min. |
I-DIN 1623 T2 (endala) |
| S215G |
Q |
1.0116G |
≥215 |
360 - 510 |
20 |
St 37-3G |
| S245G |
Q |
1.0144G |
≥245 |
430 - 580 |
18 |
St 44-3G |
| S325G |
Q |
1.0570G |
≥325 |
510 - 680 |
16 |
St 52-3G |
Intsimbi epholileyo eqengqelekayo ikwayinxalenye yepotfoliyo yethu yemveliso. Intsimbi epholileyo eqengqelekayo igqwesile ekwenzeni okubandayo. Eli qela lemveliso labela amabanga DC01 ukuya ku-DC07, DC01EK ukuya kwi-DC06EK, DC03ED ukuya ku-DC06ED kunye ne-S215G ukuya kwi-S325G.
Amabakala ahlelwa ngokowona mandla aphezulu avumelekileyo esivuno kwaye anokwahlulwa ngolu hlobo lulandelayo.
DC01 – Eli bakala lingasetyenziselwa ukwenza umsebenzi olula, umzekelo, ukugoba, ukufaka amaso, ukutsala nokutsala kusetyenziswa.
DC03 – Eli bakala lilungele ukwenza iimfuno ezinjengomzobo onzulu kunye neeprofayile ezinzima ezifanelekileyo.
DC04 – Lo mgangatho ufanelekile kwiimfuno zotshintsho oluphezulu.
DC05 – Eli bakala le-thermoforming lilungele iimfuno zokubumba eziphezulu.
DC06 – Lo mzobo ubunzulu ubunzulu obukhethekileyo bufanelene nezona mfuno ziphezulu zotshintsho.
DC07 – Lo mgangatho womzobo unzulu kakhulu ufanelekile kwiimfuno zoguquko olugqithisileyo.
Amanqaku ane-enameled
Amabakala ensimbi i-DC01EK, i-DC04EK kunye ne-DC06EK ifanelekile kwi-enamelling eqhelekileyo ye-single-layer okanye i-double-layer.
Amabakala ensimbi i-DC06ED, i-DE04ED kunye ne-DC06ED ifanelekile kwi-enamelling ngokuthe ngqo kunye ne-enamelling ngokweendlela ezimbini zokudubula / enye yokudubula kunye nezicelo ezikhethekileyo ze-enamelling ezimbini zokuphazamiseka kwe-low-distortion enamelling.
Uhlobo lomphezulu
Umphezulu A
Iimpazamo ezinjengama-pores, ama-grooves amancinci, ama-warts amancinci, ama-warts amancinci kunye nokuguqulwa kwebala elincinane elingachaphazeli ukukwazi ukubunjwa kwakhona kunye nokunamathela kwiingubo zomphezulu zivunyelwe.
Umphezulu B
Icala elingcono kufuneka likhululeke kwiziphene ukwenzela ukuba ukubonakala okulinganayo komgangatho ogqityiweyo okanye isambatho esifakwe nge-electrolytically singonakali. Elinye icala kufuneka ubuncinane lihlangabezane neemfuno zodidi lomphezulu A.
Ukugqitywa komphezulu
Umphezulu wokugqiba unokuba mtyibilizi, ube buthuntu okanye urhabaxa. Ukuba akukho zinkcukacha zinikiweyo xa uodola, ukugqitywa komphezulu kuya kuhanjiswa kwi-matt finish. Iziqendu ezine zomphezulu ezidweliswe zihambelana namaxabiso obunzima beziko kwitheyibhile elandelayo kwaye kufuneka ivavanywe ngokuhambelana ne-EN 10049.
| Ukugqitywa komphezulu |
uphawu |
Umyinge wokugqitywa komphezulu
(ixabiso lomda: 0,8mm) |
| Iflethi ekhethekileyo |
b |
Ra ≤ 0,4 µm |
| flat |
g |
Ra ≤ 0,9 µm |
| Mat |
m |
0,60 µm ˂ Ra ≤ 1,9 µm |
| rhabaxa |
r |
Ra ≤ 1,6 µm |
.jpg)
