Hot Rolled / Cold Rolled 201/301/304/316/410/430 Stainless Steel Round Bar na detalye
Hindi kinakalawang na asero na grado:
200Series –201,202,204,205
300Series –301,302,303,304,304L,304H,316,316L,309S,310S, 321,
400Series – 410(1Cr13),420(2Cr13),430(1Cr17)Atbp.
Hugis: Bilog, Hex square, anggulo, flat, Square
Pamantayan: ASTM, EN10272, JIS4303, JIS G-4311, AISI, GB
Ibabaw: Liwanag, Pinakintab, Pumakinis (nabalatan), Brush, gilingan
Haba: Ayon sa mga espesyal na pangangailangan ng kliyente, ito ay form na 50mm~8000mm
Sukat ng Diameter: Hot rolled round bar, ito ay mula sa 5.5mm~ 100mm
Cold forged round bar, Ito ay mula sa 100mm~260mm
Grinding bar, Ito ay mula sa 3.0mm~160mm
Cold drawn round bar, Ito ay mula sa 1.0mm~50mm
Lumiko ang makinis na bar, Ito ay mula sa 20mm~220mm
Hex square bar, Ito ay hugis 2.5mm~10mm
Square bar, Ito ay mula sa 4mm~100mm
Mayroon kaming isang espesyalista na nakatuon sa Hot Rolled /Cold Rolled 201/301/304/316/410/430 Stainless Steel Round Bar team na maaaring magbigay ng mga sumusunod na stainless steel grade sa bar at round bar form na may mga sumusunod na laki sa stock:
Grade |
Bar (mm) [Diameter] |
UNS S31254 |
12.70 – 304.80 |
Ss 304/304L |
9.52 – 406.40 |
Ss 316/316L |
9.52 – 520.00 |
Ss 321 |
– |
Ss 303 |
9.52 – 215.90 |
17-4 PH |
9.52 – 210.00 |
AISI 416 |
50.80 – 139.70 |
AISI 431 |
50.80 – 139.70 |
Grade | C | Si | Mn | P | S | Ni | Cr | Mo |
201 | ≤0 .15 | ≤0 .75 | 5. 5-7. 5 | ≤0.06 | ≤ 0.03 | 3.5 -5.5 | 16 .0 -18.0 | - |
202 | ≤0 .15 | ≤l.0 | 7.5-10.0 | ≤0.06 | ≤ 0.03 | 4.0-6.0 | 17.0-19.0 | - |
301 | ≤0 .15 | ≤l.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 6.0-8.0 | 16.0-18.0 | - |
302 | ≤0 .15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 8.0-10.0 | 17.0-19.0 | - |
304 | ≤0 .0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 8.0-10.5 | 18.0-20.0 | - |
304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 9.0-13.0 | 18.0-20.0 | - |
309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 12.0-15.0 | 22.0-24.0 | - |
310S | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.035 | ≤ 0.03 | 19.0-22.0 | 24.0-26.0 | |
316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 10.0-14.0 | 16.0-18.0 | 2.0- |
316L | ≤0 .03 | ≤1.0 | ≤2.0 | ≤0.045 | ≤ 0.03 | 12.0 - 15.0 | 16 .0 -1 8.0 | 2.0 - |
321 | ≤ 0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤ 0.03 | 9.0 - 13 .0 | 17.0 -1 9.0 | - |
630 | ≤ 0.07 | ≤1.0 | ≤1.0 | ≤0.035 | ≤ 0.03 | 3.0-5.0 | 15.5-17.5 | - |
631 | ≤0.09 | ≤1.0 | ≤1.0 | ≤0.030 | ≤0.035 | 6.50-7.75 | 16.0-18.0 | - |
904L | ≤ 2.0 | ≤0.045 | ≤1.0 | ≤0.035 | - | 23.0·28.0 | 19.0-23.0 | 4.0-5.0 |
2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.030 | ≤0.02 | 4.5-6.5 | 22.0-23.0 | 3.0-3.5 |
2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 6.0-8.0 | 24.0-26.0 | 3.0-5.0 |
2520 | ≤0.08 | ≤1.5 | ≤2.0 | ≤0.045 | ≤ 0.03 | 0.19 -0. 22 | 0. 24 -0 . 26 | - |
410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤ 0.03 | - | 11.5-13.5 | - |
430 | ≤0.1 2 | ≤0.75 | ≤1.0 | ≤ 0.040 | ≤ 0.03 | ≤0.60 | 16.0 -18.0 | - |