| Element |
Type 316 (%) |
Nyora 316L (%) |
| Carbon |
0.08 max. |
0.03 max. |
| Manganese |
2.00 max. |
2.00 max. |
| Phosphorus |
0.045 max. |
0.045 max. |
| Sulfur |
0.03 max. |
0.03 max. |
| Silicon |
0.75 max. |
0.75 max. |
| Chromium |
16.00-18.00 |
16.00-18.00 |
| Nickel |
10.00-14.00 |
10.00-14.00 |
| Molybdenum |
2.00-3.00 |
2.00-3.00 |
| Nitrogen |
0.10 max. |
0.10 max. |
| Iron |
Balance |
Balance |
| Surface Finish |
Tsanangudzo |
Application |
| 2B |
Idzo dzakapedzwa, mushure mekutonhora kukungurutswa, nekupisa kurapwa, pickling kana kumwe kurapwa kwakafanana uye kwekupedzisira nekutonhora kukunguruka kuti ipe kupenya kwakakodzera. |
Midziyo yekurapa, Indasitiri yeChikafu, Zvekuvaka, Midziyo yeKitchen. |
| BA |
Avo vakagadziridzwa neyakajeka kupisa kurapwa mushure mekutonhora kukunguruka. |
Midziyo yekicheni, Midziyo yeMagetsi, Kuvaka kuvaka. |
| NO.3 |
Idzo dzakapedzwa nekukwenenzverwa neNo.100 kusvika kuNo.120 mabrasives anotsanangurwa muJIS R6001. |
Midziyo yekicheni, Kuvaka kuvaka. |
| NO.4 |
Idzo dzakapedzwa nekukwenenzverwa neNo.150 kusvika kuNo.180 mabrasives akataurwa muJIS R6001. |
Midziyo yekicheni, Kuvaka kuvaka, Midziyo yekurapa. |
| HL |
Idzo dzakapedzwa kukwenenzverwa kuitira kuti dzirambe dzichikwenenzverwa mitsetse nekushandisa abrasive yehukuru hwezviyo hwakakodzera. |
Kuvaka kuvaka |
| NO.1 |
Iyo yepamusoro inopedzwa nekupisa kupisa uye pickling kana maitiro anoenderana ipapo mushure mekupisa kupisa. |
Kemikari tangi, pombi. |
Midziyo yekugadzirira chikafu, mabhenji emurabhoritari nemidziyo, zvikepe zvezvikepe, zvikamu zvemigodhi, kuchera mvura yekushambadzira yemvura, midziyo yemakemikari, zvinopisa kupisa, tambo dzakasungwa, zvitubu,
Mafomu: Bar, tsvimbo, ndiro, sheet, coil, strip, chubhu, pombi
FAQ
Q: Uri kutengesa kambani kana mugadziri?
A: Isu tiri kambani yekutengesa ine makore anopfuura gumi neshanu ruzivo mubhizinesi rekutengesa kunze simbi, tine kushandira pamwe kwenguva refu nezvigayo zvikuru muChina.
Q:Uchaendesa zvinhu nenguva here?
A: Hongu, tinovimbisa kupa zvigadzirwa zvemhando yepamusoro uye kuendesa panguva.Kutendeseka ndiyo tsika yekambani yedu.
Mubvunzo:Unopa samples here? ndezvemahara here kana kuwedzera?
A: Sample inogona kupa mutengi mahara, asi mutakuri wekutakura achavharwa neakaundi yevatengi.
Mubvunzo: Unobvuma kuongororwa kwechitatu here?
A: Hongu tinobvuma zvachose.
Mubvunzo: Ndezvipi zvigadzirwa zvako zvikuru?
A: Carbon simbi, alloy simbi, Stainless simbi ndiro/coil, pombi uye fittings, zvikamu etc.
Q: Unogona kugamuchira kurongeka kwecustomer?
A: Hongu, tinovimbisa.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
