Simbi inotonhora yakakungurutswa maererano neDIN EN 10130, 10209 uye DIN 1623
| Hunhu |
Kuedza nzira |
Material-No. |
Goho poindi Rp0,2 (MPa) |
Tensile simba Rm (MPA) |
Elongation A80 (mu%) min. |
r-Kukosha 90° min. |
n-Kukosha 90° min. |
Tsanangudzo Yakare |
| DC01 |
Q |
1.0330 |
≤280 |
270 - 410 |
28 |
|
|
St 12-03 |
| DC03 |
Q |
1.0347 |
≤240 |
270 - 370 |
34 |
1,30 |
|
St 13-03 |
| DC04 |
Q |
1.0338 |
≤210 |
270 - 350 |
38 |
1,60 |
0,18 |
St 14-03 |
| DC05 |
Q |
1.0312 |
≤180 |
270 - 330 |
40 |
1,90 |
0,20 |
St 15-03 |
| DC06 |
Q |
1.0873 |
≤170 |
270 - 330 |
41 |
2,10 |
0,22 |
|
| DC07 |
Q |
1.0898 |
≤150 |
250 - 310 |
44 |
2,50 |
0,23 |
|
| Hunhu |
Kuedza nzira |
Material-No. |
Goho poindi Rp0,2 (MPa) |
Tensile simba Rm (MPA) |
Elongation A80 (mu%) min. |
r-Kukosha 90° min. |
n-Kukosha 90° min. |
| DC01EK |
Q |
1.0390 |
≤270 |
270 - 390 |
30 |
|
|
| DC04EK |
Q |
1.0392 |
≤220 |
270 - 350 |
36 |
|
|
| DC05EK |
Q |
1.0386 |
≤220 |
270 - 350 |
36 |
1,50 |
|
| DC06EK |
Q |
1.0869 |
≤190 |
270 - 350 |
38 |
1,60 |
|
| DC03ED |
Q |
1.0399 |
≤240 |
270 - 370 |
34 |
|
|
| DC04ED |
Q |
1.0394 |
≤210 |
270 - 350 |
38 |
|
|
| DC06ED |
Q |
1.0872 |
≤190 |
270 - 350 |
38 |
1,60 |
|
| Hunhu |
Kuedza nzira |
Material-No. |
Goho poindi Rp0,2 (MPa) |
Tensile simbaRm (MPA) |
Elongation A80 (mu%) min. |
DIN 1623 T2 (yekare) |
| S215G |
Q |
1.0116G |
≥215 |
360 - 510 |
20 |
St 37-3G |
| S245G |
Q |
1.0144G |
≥245 |
430 - 580 |
18 |
St 44-3G |
| S325G |
Q |
1.0570G |
≥325 |
510 - 680 |
16 |
St 52-3G |
Cold rolled simbi zvakare chikamu chechigadzirwa chedu portfolio. Cold rolled steel yakanakira kugadzira kutonhora. Iri boka rezvigadzirwa rakapa mamakisi DC01 kuDC07, DC01EK kuDC06EK, DC03ED kuDC06ED uye S215G kuS325G.
Iwo magiredhi akaiswa muchikamu zvichienderana nehukuru hunobvumidzwa simba regoho uye anogona kupatsanurwa sezvizvi.
DC01 – Giredhi iri rinogona kushandiswa kuita basa rakapfava rekugadzira, semuenzaniso Kupeta, kuseta, kubhenda nekudhonza zvinoshandiswa.
DC03 – Giredhi iri rakakodzera kuumba zvinodiwa zvakaita seDeep drawing uye maprofile akaoma akakodzera.
DC04 – Hunhu uhwu hunoenderana nezvinodiwa zvedeformation.
DC05 – Iri giredhi re thermoforming rakakodzera kuforoma yepamusoro zvinodiwa.
DC06 – Hunhu uhwu hwakadzama hwekudhirowa hwakakodzera kuchenesesa kwepamusoro zvinodiwa.
DC07 – Uku kudhirowa kwakadzama kwemhando yakanyatsokodzera kushanduka kwezvinodiwa.
Enamelled mamakisi
Magiredhi esimbi DC01EK, DC04EK uye DC06EK akakodzera kune akajairwa single-layer kana kaviri-layer enamelling.
Simbi magiredhi DC06ED, DE04ED uye DC06ED akakodzera kunanga enamelling uyewo enamelling maererano maviri-layer / imwe-firing nzira uye nokuda kwakakosha kushandiswa kwemaviri-layer enamelling kune yakaderera-kukanganisa enamelling.
Surface type
Pamusoro A
Zvikanganiso zvakadai semapores, maduku maduku, maduku maduku, zvipembenene zvishoma uye zvishoma zvishoma zvisingakanganisi kukwanisa kugadzirisa zvakare uye kunamatira kumucheka wepamusoro zvinobvumirwa.
Pamusoro B
Rutivi rwuri nani runofanira kunge rusina hurema kuitira kuti kutaridzika kwakafanana kwemhando yekupedzisa kana iyo electrolytically yakaiswa coating haina kukanganisa. Rimwe divi rinofanirwa kuzadzisa zvinodiwa zvemhando yepamusoro A.
Surface finish
Iyo yepamusoro pekupedzisira inogona kunyanya kutsvedzerera, yakagomara kana yakaoma. Kana pasina ruzivo rwakapihwa paunenge uchiodha, iyo yekumusoro kupera inounzwa mune matt kupera. Iwo mana epamusoro pekupedzisira akanyorwa anoenderana nepakati roughness kukosha mune inotevera tafura uye inofanirwa kuyedzwa zvinoenderana neEN 10049.
| Surface finish |
hunhu |
Avhareji yepamusoro kupera
(muganho kukosha: 0,8mm) |
| Special flat |
b |
Ra ≤ 0,4 µm |
| flat |
g |
Ra ≤ 0,9 µm |
| Mat |
m |
0,60 µm ˂ Ra ≤ 1,9 µm |
| rough |
r |
Ra ≤ 1,6 µm |
.jpg)
