30CrMnSiA hot rolled steel sheet

Alloy structural steel is a kind of steel which is used as mechanical parts and various engineering components, whichcontains one or more alloy elements.
30CrMnSiA is a medium carbon with high strength and poor welding performance.
30CrMnSiA has high strength and sufficient toughness after quenching and tempering, and hardenability is also good. After quenching and tempering, the material can be used as a grinding wheel shaft, gears and sprockets.
30CrMnSiA has good processability, small processing deformation and good fatigue resistance. For shaft and piston parts and so on. It is used in various special wear parts such as automobiles and airplanes.
The material is darker in color and galvanized can add aesthetics and rust.

SUPPLY RANGE OF of GB/T 30CrMnSiA 

-Dimension: Diameter 4-1600 mm, any length below 16 meters

-Delivery Conditions:

Cold drawn: 4-100 mm

Peeled: 30-160 mm

Grinded: 4- 600 mm

Turned: 130-1200 mm

Hot rolled: 12-320 mm

Hot forged: 130-1600 mm

-EAF+(ESR) or EAF+LF+VD+(ESR)

-HOT rolled; Cold rolled; Forged; Cold Drawn

-Heat Treatment: Untreated, Annealing, N+T, Q+T

-Smelting: EAF+LF+VD (+ESR)

-Surface Finish: Black, Rough Machined, Peeled, Turned or upon request

-UT 100% passed

-Cutting service provided

-Third Party inspection is acceptable (SGS, BV etc.)

Grade	C	Si	Mn	P	S	Ni	Cr	Cu
30CrMnSiA	0.28- 0.34	0.90- 1.20	0.80- 1.10	0.025 max	0.025 max	≤ 0.40	0.80- 1.10	≤ 0.25

 

Mechanical properties

Yield strength σs/MPa (>=)	Tensile strength σb/MPa (>=)	Elongation δ5/% (>=)	Reduction of area ψ/% (>=)	Impact absorbing energy Aku2/J (>=)	Hardness HBS 100/3000 max
835	1080	10	45	39	229

APPLICATIONS
Grinding wheel shaft, gears and sprockets
Special waer parts of automobiles and airplanes
Kinds of tool shaped cutlery
Shaft and piston parts
 

Quality Assurance

Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET