EN10155 S235 J0W steel

EN10155 S235 J0W steel plate, under EN 10155 standard, we can regard S235J0W steel plate as Steel Resistant to Atmospherical Corrosion.S235J0W steel plate is one mainly of Steel Resistant to Atmospherical Corrosion, S235J0W steel plate would be used to built containers which can bear low temperature sea water. S235J0W steel plate is a structural steel grade which be used in riveted, bolted, or welded construction ofbridges and buildings.

The specifications:
Thickness: 3mm--150mm
Width: 30mm--4000mm
Length: 1000mm--12000mm
Standard: ASTM EN10025 JIS GB

S235J0W  steel sheet Chemical analysis -% by  mass*

Grades	C	Si	Mn	P	S	Cu	Cr	Ni
	max	max	max	max	max.	max	max	max
S235 J0W	0.13	0.4	0.20-1.66	0.035	0.035	0.25-0.55	0.40-0.80	0.65

S235J0W  steel sheet Mechanical  properties 

GradesS235 JOW	Yield StrengthReH[N/mm2]transv.min		TensileStrengthRm[N/mm2]transv		FractureElongation[%]transv. min.		Notch ImpactEnergy1)Ch Vcomplete samplelongitud. min [J]
	e2) ≤ 16	e2)> 16	e2)< 3	e2)≥3	e2) ≤ 2	e2) ≤ 2
	235	225	360 to 510	360 to 510	19/17	20/18	-

Normen

Europa	Werkst.-Nr.	DE	US	Salzgitter Flachstahl	FK1)
EN 10025-5		SEW 087	ASTM
S235J0W	1.8958	-	-	Allwesta 360	A
S235J2W	1.8961	WTSt 37-3	-	Allwesta 360 F	A
S355J0WP	1.8945	-	-	Allwesta 510 P	B
S355J2WP	1.8946	-	A 242 Type 1	Allwesta 510 FP	B
S355J0W	1.8959	-	A 588	Allwesta 510	B
S355J2W	1.8965	WTSt 52-3	-	Allwesta 510 F	B
S355K2W	1.8967	-	-	Allwesta 510 F 40	B

FK = Festigkeitsklasse, siehe Abmessungen

Chemische Zusammensetzung in Gewichtsprozent [%] (Schmelzenanalyse)

Sorte	C	Si	Mn	P	S	N	Cr
	max.	max.			max.	max.
S235J0W1)	0,13	0,40	0,20 - 0,60	max. 0,035	0,035	0,0092) 3)	0,40 - 0,80
S235J2W1)	0,13	0,40	0,20 - 0,60	max. 0,035	0,030	– 4)	0,40 - 0,80
S355J0WP1)	0,12	0,75	max. 1,0	0,06 - 0,15	0,035	0,0093)	0,30 - 1,25
S355J2WP1)	0,12	0,75	max. 1,0	0,06 - 0,15	0,030	– 4)	0,30 - 1,25
S355J0W1)5)	0,16	0,50	0,50 - 1,50	max. 0,035	0,035	0,0092) 3)	0,40 - 0,80
S355J2W1)5)	0,16	0,50	0,50 - 1,50	max. 0,030	0,030	– 4)	0,40 - 0,80
S355K2W1)5)	0,16	0,50	0,50 - 1,50	max. 0,030	0,030	– 4)	0,40 - 0,80

Mechanische Eigenschaften1)

Sorte	Probenlage	Min. Streckgrenze2) [MPa]		Zugfestigkeit2) [MPa]		Min. Bruchdehnung2) [%]
						L0 = 80 mm			L0 = 5,65 √S0
		e ≤ 16	e > 16	e<3	e ≥ 3	e≤2	2< e < 2,5	2,5 < e < 3	e ≥ 3
S235J0W	l/t	235	225	360 - 510	360 - 510	19/17	20/18	21/19	26/24
S235J2W	l/t	235	225	360 - 510	360 - 510	19/17	20/18	21/19	26/24
S355J0WP	l/t	3553)	-	510 - 680	4703) - 6303)	16/14	17/15	18/16	22/203)
S355J2WP	l/t	3553)	-	510 - 680	4703) - 6303)	16/14	17/15	18/16	22/203)
S355J0W	l/t	355	345	510 - 680	470 - 630	16/14	17/15	18/16	22/20
S355J2W	l/t	355	345	510 - 680	470 - 630	16/14	17/15	18/16	22/20
S355K2W	l/t	355	345	510 - 680	470 - 630	16/14	17/15	18/16	22/20

s355jow steel plate Properties

Chemical Properties Of s355jow Steel Plate

Grade	C	Si	Mn	P	S	N	Addition of nitrogen binding elements	Cr	Cu
S355J0W	0.16	0.50	0.50/1.50	0.035	0.035	0.009	–	0.40/0.80	0.25/0.55

Mechanical Properties Of s355jow Steel Plate

Grade	Min. Yield Strength Reh MPa						Tensile Strength Rm MPa
	Nominal Thickness (mm)						Nominal Thickness (mm)
	≤16	>16 ≤40	>40 ≤63	>63 ≤80	>80 ≤100	>100 ≤150	>3	>3 ≤100	>100 ≤150
S355J0W	355	345	335	325	315	295	510/680	470/630	450/600

EQUIVALENT SPECIFICATIONS

Material #	EN 10155	SEW 087	NFA 35-502	UNI	BS 4360	ASTM	JIS G3114
1.8961	S235J2W	WTSt 37-3	E 24 W 4	Fe 360 DK 1	–	–	–
1.8945	S355J0WP	E 36 WA 3	Fe 510 C1K1	WR 50 A	–	–	–
1.8946	S355J2WP	–	E 36 WA 4	Fe 510 D1K1	–	A 242 Type 1	–
1.8959	S355J0W	–	E 36 WB 3	Fe 510 C2K1	WR 50 B	A 588 – A 242 Gr. 1	SMA 50 AW
1.8963	S355J2G1W	WTSt 52-3	–	Fe 510 D2K1	WR 50 C	A 588 Gr. A	to
1.8965	S355J2G2W	–	–	–	–	–	SMA 50 CP
1.8966	S355K2G1W	–	E 36 WB 4	–	–	A 709 Gr. 50 W	–
1.8967	S355K2G2W	–	–	–	–	–	–