SA387 Chromium Molybdenum Alloy Steel Plate for Pressure Vessel

2020-06-18 19:32:55

Brief Introduction of SA387
SA387 GR11 22 American standard chromium molybdenum alloy steel plate for pressure vessel
Uses: SA387-11 corresponds to 15CrMoR, used in petroleum, chemical, power station, boiler and other industries, for manufacturing reactors, heat exchangers, separators, spherical tanks, oil and gas pipes, liquefied gas tanks, nuclear reactor pressure shells, boiler drums, Liquefied petroleum gas cylinders, high-pressure water pipes for hydropower stations, turbine volutes and other equipment and their construction
There are different grade under this standard:
A387 GR2
A387 GR12
A387 GR11
A387 GR22
A387 GR22L
A387 GR21
A387 GR21L
A387 GR5
A387 GR9
A387 GR91

It is so called alloy steel, which is able to have 13% refund duty, which means lower price for client in oversea market.
Al:≥0.3%
B:≥0.0008%
Cr:≥0.3%
Co:≥0.3%
Cu:≥0.4%
Pb:≥0.4%
Mn:≥1.65%
Mo:≥0.08%
Ni:≥0.3%
Nb:≥0.06%
Si:≥0.6%
Ti:≥0.05%
The smallest thickness is 6mm. All stock in China market is plate form, no coil due to its heat treatment requirement.

Grade	Temperature ℃
2，,1 and 11	620
22 22,21, 21,and 9	675
5	705

Class I

	Grade 2 and 12	Grade 11	Grade 22 21 5 9 21L 22L
Tensile Strength(MPa)	380-550	415-585	415-585
Yield Strength (MPa)	230	240	205
Elongation( %)	22	22	18

Class II

	Grade 2	Grade 11	Grade 12	Grade22 21 5 9	Grade 91
Tensile Strength(MPa)	485-620	450-585	450-585	515-690	585-760
Yield Strength (MPa)	310	310	275	310	415
Elongation%	22	22	22	18	18

What is Bleeding Steel

Baotou Steel put into Operation a New Continuous Rolling Production Line of Small Diameter SMLS Pipe