Cold Rolled Closed Annealed Coil

GNEE’s Cold Rolled Closed Annealed (CRCA) Coils and Sheets are produced through the cutting-edge Cold Rolling Mills (CRM) at GNEE Company. The 3.3 Mtpa CRM’s modern facilities, advanced operational technologies, strict inspection processes, and integrated quality control, ensure an excellent product. Cold rolling of steel is a process of treating steel below its recrystallization temperature. This method is used to get a uniform thickness, increase thickness tolerances, and improve strength and a smooth surface finish through strain hardening. Though cold rolling has these advantages, the ductility of the cold-rolled steel is reduced due to the dislocations that are formed due to cold rolling. In order to achieve good ductility, it is necessary that cold-rolled steel must undergo a process called annealing. This reduces the stress in the steel that was formed during the cold rolling process. Annealing is the process of relieving the internal stresses in the steel that was built up during the cold rolling process. In this process, the cold-rolled steel is heated above its recrystallization temperature by soaking the steel at that temperature and then cooling it. Annealing is done in a controlled gas atmosphere consisting of nitrogen and hydrogen gases in various compositions. This is done to prevent surface rusting resulting from oxidation. GNEE’s CRCA products are consists of Deep Drawing, Extra Deep Drawing, Interstitial Free Steels, Interstitial Free high strength steel of tensile strength up to 550 MPa, Bake hardening steel having tensile strength up to 440 MPa, Low Carbon steel of Tensile strength 650 MPa max, High strength low alloy-steel having Yield strength up to 1000 MPa, Dual-Phase steel having Tensile strength up to 1350 MPa, TRIP steel of Tensile strength up to 1200 MPa and Complex phase steel of tensile strength up to 1200 MPa.

Cold rolled close annealed steel is manufactured by GNEE in medium and high carbon grades of steel. CRCA is available in the below range :

Thickness	0.30-3.00 mm
Width	1000-1540 mm
Length (For Sheets)	500 mm to 4000 mm
Temper	1/8 Hard , 1/4 Hard, 1/2 Hard, Full Hard
Surface Finish	Dull/Bright/RIM/Matt/Mirror
Coil Weight	Depends on size specification
Coil ID	400 to 600 mm
Coil OD	up to 1800 mm

About our company
GNEE STEEL Co., Ltd. is a professional manufacturer of cold rolled closed annealed coil. The company is a professional manufacturer of cold-rolled steel strips and coils, with many competitive advantages in the same industry. Our company has 16 years of export experience, convenient transportation, sufficient inventory, and fast delivery speed. Please feel free to inquire and place an order.
Email:gi@gneesteel.com
Whatsapp/Wechat：+8615824687445