Chemical et Mechanica
34CrNiMo6 compositio chemica et equivalentes gradus chalybi possessiones
| BS EN 10083 – 3:2006 |
34CrNiMo6 |
C |
Si |
Si |
P |
S |
Cr |
Mo |
Ni |
| 0.30-0.38 |
0.40 Max |
0.50-0.80 |
0.018 max |
0.003 max |
1.30-1.70 |
0.15-0.30 |
1.30-1.70 |
34CrNiMo6 Steel Mechanica Properties
| Diameter(mm) |
< 16 |
16~ 40 |
40~100 |
100~160 |
160 ~250 |
| Crassitudo t (mm) ; |
< 8 |
8~20 |
20~60 |
60~100 |
100~160 |
| Robora distrahentes Rm (N/mm2) |
1200 – 1400 |
1100 – 1300 |
1000 – 1200 |
900 – 1100 |
800 – 950 |
| Prolongatio A (%) |
9 min |
10 Min |
11 Min |
Min 12 |
13 Min |
| Reductio areae Z (%) |
40Min |
45 Min |
50Min |
55Min |
55MIn |
| CVN lentitudo (J). |
35Min |
45Min |
45Min |
45Min |
45 Min |
| Vires cede Re (N/mm²) |
1000 Min |
900 Min |
800 Min |
700 Min |
600 Min |
EN 34CrNiMo6 Ferro Signa Et Equivalents
| BS EN 10083 -3: 2006 |
34CrNiMo6/ 1.6582 |
ASTM A29: 2004 |
4337 |
| BS EN 10250 – 3: 2000 |
3. LAT/DIN 34CrNiMo6 Steel Chemical Composition Properties
| BS EN 10083 – 3:2006 |
34CrNiMo6
/1.6582 |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
| 0.30-0.38 |
0.5-0.8 |
0.40 max |
0.018 max |
0.003 max |
1.3-1.7 |
0.15-0.30 |
1.3-1.7 |
| BS EN 10250-3: 2000 |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
| 0.30-0.38 |
0.5-0.8 |
0.40 max |
0.003 max |
0.003 max |
1.3-1.7 |
0.15-0.30 |
1.3-1.7 |
| ASTM A29: 2004 |
4337 |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
| 0.30-0.40 |
0.6-0.8 |
0.20-0.35 |
0.003 max |
0.003 max |
0.70-0.90 |
0.20-0.30 |
1.65-2.00 |
4.Mechanica Proprietates EN/DIN 34CrNiM06 / 1.6582 Admixtum Ferro
| Properties |
< 16 |
>16 - 40 |
>40 – 100 |
>100 – 160 |
>160 – 250 |
| Crassitudo t[mm]; |
< 8 |
8
| 20
| 60
| 100
|
| Cedant vires Re[N/mm²] |
min. 1000 |
min. 900 |
min. 800 |
min. 700 |
min. 600 |
| Robur distrahens Rm [N/mm2] |
1200 – 1400 |
1100 – 1300 |
1000 – 1200 |
900 – 1100 |
800 – 950 |
| Elongation A [%] |
min. 9 |
min. 10 |
min. 11 |
min. 12 |
min. 13 |
| Reductio areae Z [%] |
min. 40 |
min. 45 |
min. 50 |
min. 55 |
min. 55 |
| CVN lentitudine [J]. |
min. 35 |
min. 45 |
min. 45 |
min. 45 |
min. 45 |
5.Heat Curatio 34CrNiMo6 Engineering Steel
Extincta et temperata (Q+T) de 34CrNiMo6 Steel
- Calor 34CrNiMo6 circum ferrum lente ad temperiem 850°C;
- Macerari hanc duritiem in oleo restinguite temperamentum;
- Ingenium simul ac 34CrNiMo6 ferro ad cameram temperiem.
- Æstus uniformiter ad temperiem convenientem;
- Recede a fornace et frigus in aere.
- Temperatura temperatura solita DC°C est quae secundum ipsas necessitates pendet.
6.Forging of DIN 34CrNiMo6/ 1.6582 Steel
Calor formans temperaturam: 1100-900oC.
7.Machinability Ferri 34CrNiMo6
Machinatio optime fit cum hoc 1.6582 ferro mixturae in conditione annata vel normalizata et temperata. Omnibus modis institui potest.
8.Welding
Mixtura materiae fusio vel resistentia iuncta esse potest. Preheat et post calidum conglutinatio ratio adhibenda est cum glutino hoc mixturae certis modis adhibitum est.
9.Application
LAT DIN 34CrNiMo6 ferro ad instrumenta conficienda sunt quae materiam bonam et virtutem altam postulat. Solet delectus facere partes magnas et magnas, ut axem machinarum grave, scapum turbinum, scapum altum, onus partium transmissionis, fasteners, crank spicula, annicula, ac partes oneratae ad constructionem motoriam etc.
Gnee Steel certa est ad machinam machinarum 34CrNiMo6 chalybi / 1.6582 machinationis admisceri. Quaeso dic nobis singula requisita tua et primum optimum offeres.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
