30CrMnSiA na-ekpo ọkụ mpịakọta ígwè mpempe akwụkwọ

Alloy structural steel bụ ụdị nchara nke a na-eji dị ka akụkụ igwe na akụrụngwa injinia dị iche iche, nke nwere otu ma ọ bụ karịa ihe alloy.
30CrMnSiA bụ carbon dị ọkara nwere ike dị elu yana arụmọrụ ịgbado ọkụ adịghị mma.
30CrMnSiA nwere ike dị elu yana ike zuru oke mgbe emenyụchara na iwe, na ike siri ike dịkwa mma. Mgbe emechara na iwe ọkụ, enwere ike iji ihe ahụ mee ihe dị ka ogwe ụkwụ na-egweri, gia na sprockets.
30CrMnSiA nwere ezigbo nhazi nhazi, obere nrụrụ nhazi na ezigbo ike ọgwụgwụ. Maka ogwe osisi na akụkụ piston na ihe ndị ọzọ. A na-eji ya na akụkụ dị iche iche eyi uwe pụrụ iche dị ka ụgbọ ala na ụgbọ elu.
Ihe na-agba ọchịchịrị na agba na galvanized nwere ike ịgbakwunye aesthetics na nchara.

ONYE NKE GBAPỤTA GB/T 30CrMnSiA

- Akụkụ:  Dayameta 4-1600 mm, ogologo ọ bụla n'okpuru mita 16

- Ọnọdụ nnyefe:

Oyi adọta: 4-100 mm

Akpụkpọ anụ: 30-160 mm

Egweri: 4-600 mm

tụgharịa: 130-1200 mm

Na-ekpo ọkụ akpọrepu: 12-320 mm

Akpụkpọ oku na-ekpo ọkụ: 130-1600 mm

-EAF+(ESR) ma ọ bụ EAF+LF+VD+(ESR)

-ekpo ọkụ akpọrepu; Oyi kporo; Ụgha; Oyi adọtara

-Ọgwụgwọ okpomọkụ: A naghị agwọ ya, na-akụda mmụọ, N+T, Q+T

-Eze: EAF+LF+VD (+ESR)

-Emecha n'elu: Black, Rough Machined, Peeled, Tụgharịa ma ọ bụ ọrịọ

-UT 100% gafere

-A na-enye ọrụ ịkpụ

A na-anabata nyocha nke ndị ọzọ (SGS, BV wdg)

Ọkwa	C	Si	Mn	P	S	Ni	Cr	Ku
30CrMnSiA	0.28- 0.34	0.90- 1.20	0.80- 1.10	0.025 max	0.025 max	≤ 0.40	0.80- 1.10	≤ 0.25

Ngwa igwe

Ike mpụta σs /MPa (>=)	Ike tensile σb/MPa (>=)	Ogologo oge δ5/% (>=)	Mbelata mpaghara ψ/% (>=)	Mmetụta nnabata ike Aku2/J (>=)	Isi ike HBS 100/3000 max
835	1080	10	45	39	229

Ngwa
Ogwe wheel na-egweri, ngwo na sprockets
Akụkụ mmiri pụrụ iche nke ụgbọ ala na ụgbọ elu
Ụdị cutlery ekara ngwá ọrụ
Akụkụ osisi na piston

Ntụkwasị obi ịdị mma

A ga-eme nyocha n'okpuru na mmepụta.
(1) nchọpụta ray ---RT;
(2) Nnwale ultrasonic ---UT;
(3) Nnwale Igwe Ọdụdọ-MT;
(4) ule ntinye-PT;
(5) nchọpụta ntụpọ eddy ugbu a-ET