Oyi akpọrepu ígwè dị ka DIN EN 10130, 10209 na DIN 1623
Otu n'ime ndị na-eduga Mild Steel Strip suppliers na China, na-ebunye DC01 na DIN EN 10139 Cold Rolled Uncoated Mild Steel Strip maka ịkpụ oyi, BS 1449 CS1, DC03 ruo DIN EN 10139 1449 CS1 / CS3 na DC06 ruo DIN EN 10139 Cold Rolled uncoated Mild Steel Strip maka ịkpụ oyi, BS 1449 CS4

Data teknụzụ

Oyi akpọrepu ígwè dị ka DIN EN 10130, 10209 na DIN 1623

Ogo	Ntuziaka ule	Ihe-Mba.	Ọnụ mpụta Rp0,2 (MPa)	Ike tensile Rm (MPA)	Elongation A80 (na %) min.	r-Uru 90° min.	n-Uru 90° min.	Nkọwa ochie
DC01	Q	1.0330	≤280	270 - 410	28			St 12-03
DC03	Q	1.0347	≤240	270 - 370	34	1,30		St 13-03
DC04	Q	1.0338	≤210	270 - 350	38	1,60	0,18	St 14-03
DC05	Q	1.0312	≤180	270 - 330	40	1,90	0,20	St 15-03
DC06	Q	1.0873	≤170	270 - 330	41	2,10	0,22
DC07	Q	1.0898	≤150	250 - 310	44	2,50	0,23

Ogo	Ntuziaka ule	Ihe-Mba.	Ọnụ mpụta Rp0,2 (MPa)	Ike tensile Rm (MPA)	Elongation A80 (na %) min.	r-Uru 90° min.	n-Uru 90° min.
DC01EK	Q	1.0390	≤270	270 - 390	30
DC04EK	Q	1.0392	≤220	270 - 350	36
DC05EK	Q	1.0386	≤220	270 - 350	36	1,50
DC06EK	Q	1.0869	≤190	270 - 350	38	1,60
DC03ED	Q	1.0399	≤240	270 - 370	34
DC04ED	Q	1.0394	≤210	270 - 350	38
DC06ED	Q	1.0872	≤190	270 - 350	38	1,60

Ogo	Ntuziaka ule	Ihe-Mba.	Ọnụ mpụta Rp0,2 (MPa)	Ike tensileRm (MPA)	Elongation A80 (na %) min.	DIN 1623 T2 (ochie)
S215G	Q	1.0116G	≥215	360 - 510	20	St 37-3G
S245G	Q	1.0144G	≥245	430 - 580	18	St 44-3G
S325G	Q	1.0570G	≥325	510 - 680	16	St 52-3G

Igwe igwe oyi na-atụ bụkwa akụkụ nke Pọtụfoliyo ngwaahịa anyị. Igwe oyi na-atụ oyi dị mma maka ịkpụ oyi. Otu ngwaahịa a kenyere akara ule DC01 na DC07, DC01EK ruo DC06EK, DC03ED na DC06ED yana S215G na S325G.

A na-ekewa akara ule dị ka ike mkpụrụ kacha anabata ma enwere ike kewaa ya dịka ndị a.
DC01 - Enwere ike iji ọkwa a maka ịrụ ọrụ dị mfe, dịka ọmụmaatụ na-ehulata, ịkwa akwa, beading na ịdọrọ.
DC03 – Ọkwa a dabara adaba maka imepụta ihe achọrọ dị ka eserese miri emi na profaịlụ siri ike dabara adaba.
DC04 – Àgwà a dabara maka nnukwu nrụrụ chọrọ.
DC05 – Ọkwa temometa a dabara adaba maka imepụta ihe dị elu.
DC06 – Ọdịmma ihe osise miri emi pụrụ iche dabara adaba maka nrụrụ kachasị elu chọrọ.
DC07 – Ogo eserese a dị omimi dabara adaba maka oke nrụrụ chọrọ.

Enamed akara ule
Igwe nchara DC01EK, DC04EK na DC06EK dabara adaba maka enamelling otu oyi akwa ma ọ bụ okpukpu abụọ.

Igwe nchara DC06ED, DE04ED na DC06ED dabara adaba maka enamelling ozugbo yana maka ịme aha dị ka usoro nke abụọ-layer / otu-firing si dị yana maka ngwa pụrụ iche nke enamelling okpukpu abụọ maka enamelling dị ala.

Ụdị elu

Elu A
A na-anabata mmejọ ndị dị ka pores, obere oghere, obere warts, ntanye ntanarị na obere mwepu nke na-adịghị emetụta ikike ịmegharị na ịrapagidesi ike na mkpuchi elu.

Elu B
Akụkụ kachasị mma ga-abụ nke na-enweghị ntụpọ nke mere na ọdịdị ọdịdị nke mmecha mma ma ọ bụ mkpuchi electrolytically adịghị emebi. Akụkụ nke ọzọ ga-enwerịrị opekata mpe iru ihe achọrọ nke ụdị elu A.

Ngwucha elu
Ngwucha elu ahụ nwere ike ịdị ezigbo ụtọ, chanwụrụ ma ọ bụ siri ike. Ọ bụrụ na enyeghị nkọwa mgbe ị na-enye iwu, a ga-ebufe elu elu na njedebe matt. Ngwunye elu anọ ahụ edepụtara kwekọrọ na ụkpụrụ isi ike etiti dị na tebụl na-esote, a ga-anwale ya dịka EN 10049 si dị.

Ngwucha elu	njirimara	Nkezi elu imecha (ọnụahịa oke: 0.8mm)
Flat pụrụ iche	b	Ra ≤ 0,4 µm
dị larịị	g	Ra ≤ 0,9 µm
Mat	m	0,60 µm ˂ Ra ≤ 1,9 µm
siri ike	r	Ra ≤ 1.6 µm