ALLOY 200 STAINLESS STEEL

Nickel qib 200 yog 99.6% ntshiab npib tsib xee, ib qho ntawm cov hlau tawv tshaj plaws. Nickel 200' cov yam ntxwv muaj xws li cov khoom siv zoo heev, cov ntsiab lus tsis tshua muaj roj, tsis muaj vapor-siab, cov khoom sib nqus, siab thermal thiab hluav taws xob conductivity. Cov khoom no thiab nws cov tshuaj muaj pes tsawg leeg ua rau Nickel 200 fabricatable thiab resistant rau corrosive ib puag ncig. Nickel 200 muaj txiaj ntsig zoo hauv txhua qhov chaw qis dua 600º F. Nws yog qhov tiv taus corrosion los ntawm nruab nrab thiab alkaline ntsev daws. Nickel 200 kuj muaj tus nqi qis corrosion hauv nruab nrab thiab cov dej distilled. Cov hlau tuaj yeem ua rau kub ua rau txhua yam duab thiab tsim txias los ntawm txhua txoj hauv kev.

Tshuaj muaj pes tsawg leeg

	Ni	Fe	C	Mn	Si	Cu	Mg	Ti	S
200	> 99.0	<0.40	<0.15	<0.35	<0.1	<0.25			<0.01

Mechanical Properties

Daim ntawv khoom	Qhov xwm txheej	Tensile (ksi)	.2% Yield (ksi)	Elongation (%)	Hardness (HRB)
Qws & Bar	Kub Tiav lawm	60-85	15-45	55-35	45-80
Qws & Bar	Txias Drawn/Annealed los yog Kub-Finished/Annealed	55-75	15-30	55-40	45-70
Phaj	Kub Rolled/Annealed	55-80	15-40	60-40	45-75
Daim ntawv	Annealed	55-75	15-30	55-40	70 max
Tube & Yeeb	Seamless Annealed	55-75	12-30	60-40	70 max

Lub cev muaj zog

Alloy	Density lb/cu in	Modulus ntawm Elasticity (x10^6psi)	Lub ntsiab lus Coefficient ntawm Thermal Expansion ((IN./IN./°F x 10^-6)
200	0.321	30.0	7.4

Lub cev muaj zog rau Nickel 200

Ceev, lb/in3	0.322
Modulus ntawm Elasticity, psi	30 x 106
Coefficient ntawm Thermal Expansion, 68-212˚F, /˚F	7.4x 10-6
Thermal conductivity, Btu/ft hr ˚F	38.8
Thaum tshav kub kub, Btu/lb ˚F	0.106
Hluav taws xob tiv thaiv, Microhm-in

Daim ntawv thov:

> Aerospace thiab Missile Components	> Tshuaj thiab Petrochemical ua
> Khoom noj khoom haus	> Cov kav dej hauv qab thiab sab ntug dej
> Marine thiab dej kho	> Nuclear reactor core thiab tswj cov pas nrig hauv cov dej reactors thiab cov reactors siab heev.

Ntau yam ntawm cov khoom

Phaj / Sheets / Coil	Hnyav Phaj Txias Rolled Sheet Kub Rolled Sheet Coil
Fittings	Seamless LR Luj tshib / Welded LR Luj tshib Con Reducer / Ecc Reducer Con Tee / Ecc Tee / Hla Coupling / Kab
Flange	Qhov muag tsis pom Flanges Lap Joint Flanges Tsa ntsej muag dig muag Flanges Tsa ntsej muag Slip ntawm Flanges Nce lub ntsej muag Socket Weld Flanges Raised Lub ntsej muag Threaded Flanges Tsa ntsej muag Weld Neck Flanges Slip on Phaj Flanges Qhov muag tsis pom Flanges
Tube / Tube	Seamless Yeeb Nkab Welded yeeb nkab Seamless Tube Welded Tube Seamless U-Tube Welded U-Tube Square Tube Rectangular Tube
Bar	Round Bar Square Bar Pav ca Bar Angel Bar Hexagon Bar

FAQ
Q: Koj lub sijhawm xa khoom ntev npaum li cas?
A: Feem ntau nws yog 3-7 hnub yog tias cov khoom muaj nyob hauv Tshuag. los yog nws yog 7-20 hnub yog tias cov khoom tsis nyob hauv Tshuag, nws yog raws li kom muaj nuj nqis. Q: Koj puas muab cov qauv? puas yog dawb los yog ntxiv?
A: Yog lawm, peb tuaj yeem muab cov qauv dawb xwb.

Q: Koj cov nqe lus them nqi yog dab tsi?
A: 30% tso nyiaj, 70% tshuav nyiaj them ua ntej xa khoom. (T/T) los yog LC.

Q: Qhov zoo ntawm koj lub tuam txhab yog dab tsi?
A: Peb yog pab pawg tshaj lij, peb tsom mus rau kev xa cov khoom zoo rau peb cov neeg siv khoom thoob plaws ntiaj teb. Peb ntseeg tias kev ntseeg siab thiab kev ncaj ncees yog lub hauv paus ntawm peb txoj kev lag luam.

Q: Kuv tuaj yeem tau txais cov lus hais li cas?
A: Koj tuaj yeem xa lus rau peb ntawm Made in China, lossis ntxiv peb whatsapp kom tau txais cov ntsiab lus ntxiv. Peb yuav muab koj teb sai li sai tau.